
eyeGATE-130-HDMI
Universal DVI/HDMI Encoder for Standard IP Networks
Universal DVI/HDMI Encoder for Standard IP Networks
The eyeGATE-130 is an input gate to capture DVI & HDMI signals and distribute them to standard networks. The eyeGATE encodes the signal to high quality H.264 codec and delivers the stream to any device which can decode the signal again. This can be an eyevis NPX-4800 controller or a display with embedded IP decoding solutions, as well as any eyeCON Client Software on any operator PC in the network.
ENCODER INPUT | |
Signal Type: | 1× HDMI Input / 1× HDMI Output Loop through (DVI / Display Port with optional adapter) |
Resolutions: | Supports VESA resolutions up to 1920×1200 pixels |
Signal Detection: | Auto-detection |
Audio Inputs: | 1× Stereo, unbalanced, AC-coupled, Mini-Jack 3.5 HDMI embedded Audio |
NETWORK | |
Ethernet Port: | 1× 10/100Mbit TX Ethernet Port half/full duplex AutoDetect |
Protocol: | UDP/RTP/TCP streaming, IGMP, Unicast/Multicast |
Management: | Built-in web-server / eyeCON V5 |
PROCESSING | |
Colour Format: | 4:2:0 |
Compression: | H.264 MPEG-4 AVC Part 10; baseline, main, high profiles |
Bit Rate: | up to 14Mbit (selectable) |
Frame Rate: | up to 60fps, adjustable frame rate divider |
Scaling: | down-scaling from 720p and 1080i to 720, D1 or CIF |
GENERAL | |
Power: | External power supply 100VA to 240VA, 50 -60Hz, 8W |
Operating Conditions: | 0°C to 50°C temperature environment, 20% - 90% non-condensing |
Weight: | 690g |
Dimensions: | 105mm(W) × 28mm(H) × 192mm(D) |